Deutsch
lingua italiana
日本語
PiRacer Pro, High Speed AI Racing Robot Powered by Raspberry Pi 4, Supports DonkeyCar Project, Pro Version
 PiRacer |  PiRacer Pro | |
| CONTROLLER | Raspberry Pi 4 Model B | |
|---|---|---|
| OS | Raspberry Pi OS (Raspbian) | |
| LANGUAGE | Python | |
| CAMERA | 5MP HD resolution, 160° FOV wide angle camera | |
| OLED | 0.91"128×32 pixels | |
| WIRELESS | 2.4GHz / 5GHz dual-band WiFi, Bluetooth 5.0 | |
| TELEOPERATION | Gamepad, webpage | |
| COMMUNICATION | WiFi | |
| PROTECTION | over charge/discharge protection, over current protection, short circuit protection, reverse proof | |
| DRIVING TYPE | Ackerman steering Dual gearmotor rear wheel drive | Ackerman steering High speed motors 4WD Front and rear axle differentials |
| SHOCK ABSORBER | N/A | Adjustable oil-filled shocks 4WD independent suspension |
| POWER SUPPLY | 12.6V, 18650 battery × 3 (connected in series) | 8.4V, 18650 battery × 4 (two in parallel, two in series) |
| Note: the 18650 batteries are NOT included. | ||
| MOTOR | 37-520 DC gearmotor Reduction rate 1:10 Idle speed 740RPM | RC380 high speed carbon brushed motor Idle speed 15000RPM |
| SERVO | 9kg/cm torque | 6kg/cm torque |
| CHASSIS | Aluminum alloy chassis | Quality rugged plastic chassis |
| CRASHPROOF | Front sponge | |
| PROGRAM LIBRARY | DonkeyCar | |
| SUGGESTION | Competition level Experienced programming skill required | High speed competition level Experienced programming skill required |
Send Inquiry
Related Products
Model NO. 6inch HD e-Paper HAT
Model NO. 7.5inch NFC e-Paper Eval Kit
Model NO. 5.65inch e-Paper Module (F)
Model NO. 5.65inch e-Paper (F)
Model NO. 7.5inch e-Paper (G)
Model NO. 7.3inch e-Paper HAT (G)
Model NO. 9.7inch/10.3inch/13.3inch E-paper Monitor
Model NO. 7.3inch e-Paper HAT (F)
